As part of the Water Health Check, we’ll produce a 9 point plan which includes
a FREE Water Audit* and includes services such as:
• Consumption profiling
• Identify incorrect charges and report
• Negotiate & Claim rebates on your behalf
• Recommend best practice & cost saving solutions
• Water usage summary & brief report
Utilising our industry knowledge and market expertise, we’ll investigate and negotiate with the Water Authorities on your behalf to obtain refunds and lower your water costs
GET your Free Water Health Check
It’s quick, easy, will reduce your businesses operational costs and boost your bottom line
Get your Water Health Certificate
Lighting Optimiser up to 25% – Reducing the voltage to the optimum level required for the lighting to operate at its most efficient. This means a reduction in the average 250V supply to 220V.
Voltage Optimiser 8-13% – Advanced voltage optimisation technology allows most of the electrical equipment, lights, pumps, motors, air conditioning, refrigeration etc. to operate at optimum capacity whilst consuming less energy.
AC Induction Motor Control – Our intelligent motor controller provides dynamic control of a motor across a wide range of applications and conditions. Our controller constantly monitors the motor’s load and calculates the exact amount of power required at any time – reducing the amount of electricity used, increasing the life-span of motors, reducing maintenance requirements and reducing the amount of CO2 produced.
Savings can be made across many applications including:
- Air conditioning
- Refrigeration
- Conveyors
- Baggage handling
- Escalators
- Pumps
- Die cast machines
- Crushers
- Presses
- Conveyor belt
- Mixers
- Industrial saws
- Injection moulding machines
- Grinders
- Compressors
Most existing air conditioning units waste a significant part of the consumed electricity because they are not controlled intelligently. Making these air conditioning systems more energy efficient is by far the quickest, most affordable and most effective way to reduce your CO2 emissions and lower your energy bill.
What is different about the Airco Saver?
- It’s a retrofit electronic control unit that adds intelligence to existing air conditioning systems and improves their energy efficiency
- It’s a proven product with a huge number of installations that has been growing rapidly each year since 2001. Worldwide, the Airco Saver has been tested and installed successfully by various prestigious blue chip clients and leading authorities
- It achieves average energy savings of about 20% (often more, depending on local conditions) resulting in a short payback period
- It’s 100% engineered & manufactured in Germany to the highest quality standards to give you peace of mind
Contact us for Airco Saver Pricing
It is no secret that making discrete changes in and around your business site can have a dramatic effect on your energy bills. Our selection of lighting timers avoid the potentially draining issue of lights being needlessly switched on. Similarly our sensors ensure that lighting is automated to come on only when it is absolutely necessary.
High Frequency Motion Sensor – Hidden & Practical
The adjustable High Frequency sensitivity is suitable for vapour proof fittings as there is no need to drill any holes for installing. This sensor uses state-of-the-art features, which refer to the Doppler’s Principle. When someone is moving, the main lamp (controlled by the sensor relay) will turn on automatically. The lamp will not turn off until everyone has left its operating range and no movement is detected for the full duration of the relay delay time.
Passive Infrared Sensor (PIR)- Outdated & Unreliable
We recommend against the use of PIR sensors that are prevalent on many budget domestic floodlights as they are heavily reliant on the environment and have a very narrow operating temperature range.
PIR switches can rapidly and sharply decrease in sensitivity above 33°C and can fail completely when the temperature drops to less than 5°C, both of which is viable in the UK climate and in the ceiling and roof spaces in the office environment.
If your building is lit for long hours, or operates night shifts, energy savings on lighting equipment can be extremely valuable.
We can help you balance the voltage and light requirement for your buildings so that you get the perfect result in both energy saving and lighting longevity.
We’ve seen our Lighting Optimiser reduce the energy consumed by lighting by up to 25% without changing the environment or having to fit expensive new bulbs.
Start Optimising My Voltage Today!
The adapT5 converts existing T12 and T8 fluorescent fittings in to high efficiency T5 lighting systems. No extra wiring or external electrical components are needed in the starter socket, and this product is fully compliant with the Low Voltage Device European normalised Heath & Safety regulations.
The adapT5 improves your commercial lighting efficiency due to:
- A more efficient warm-up phase, as well as stable, flicker free illumination during operation, with no blackening of tube ends
- Easy installation fits into T12 & T8 fixtures
- Straightforward removal of the conventional starter, no inefficient bridge needed. No specialist required for conversion
T5 tubes contain 38% less glass and phosphorous than T12 tubes and only 5mg of mercury. Low energy consumption and optimised efficiency results in less strain on energy resources and a reduction in CO2 and zero PCB emission.
In 2010 we installed 1,750 adapT5s in various sizes into the multi-storey car park at St James Park. This resulted in a 55% reduction in running costs with an eight month payback period.
Get a Free Lighting Audit Today
Where retrofit solutions aren’t cost beneficial we can work with you to replace lighting across your office, property or estate.
Our energy consultants are experts in lighting solutions that are both energy efficient and perform perfectly, ensuring the well-being and productivity of your employees.
- Expert Audit – We assess your entire property to ascertain the exact lighting requirement
- Quality Products – We have great lighting manufacturer relationships and continuously refine the lighting we use to help you balance capital investment and ongoing running costs
- Project Management – We can manage your lighting system replacement, leaving you free to run your business
- Financial Management – We can help plan financial investment by offsetting the cost of new lighting against your energy cost
Get Your Free Lighting Consultation Today
Modern, A-Rated boilers are over 90% efficient – ensuring that the very minimum gas is wasted in producing heat for your building. Our energy consultants work to install the best boiler for your requirements, alongside other complimentary measures such as advanced heating controls and smart meters to monitor and manage every penny spent on heating.
- Our Approach – we assess your entire property to ascertain the your heating requirements
- The Best Products – we have great manufacturer relationships and always refine the boilers we use to help you balance capital investment and ongoing running costs
- Project Management – we can manage the boiler and heating system replacement for you, leaving you free to run your business
- Financial Management – we can help plan financial investment by offsetting the cost of a new boiler installation against your energy cost
Our energy consultants often advise on some simple, low-cost ways to save energy and make your air conditioning system more efficient such as correct usage of temperature controls, variable speed drives and free-cooling coils but sometimes a replacement is needed.
- We assess your entire property to ascertain the exact size, volume and method of cooling most suitable
- We have great manufacturer relationships and continuously refine the air conditioning units we use to help you balance capital investment and ongoing running costs
- We can manage the whole air conditioning project for you, leaving you free to run your business
- We can help plan financial investment by offsetting the cost of a new air conditioning installation against your energy cost
Some parts of the UK can get over 3 metres of rainfall per year. If your business can re-purpose this rainfall it can help save money on your water bill.
Rainwater harvesting can provide your business with an independent water supply during regional water restrictions or supplement your mains supply.
Relatively simple to install, rainwater harvesting systems are an excellent conservation and corporate social responsibility measure if your business is a heavy water user.
Get a FREE Water Usage Audit Today
